NEWS

BOPP-thermal matt
Type : FSP-TM 8-24 and FSP-TM 8-27

Thickness: 24 micron and 27 micron.
Description: it is a matt co-extruded polypropylene film which is EVA- pretreated on one side.
It is used for lamination of printed paper and carton. The other side is Corona-preteated and therefore usable for different printing methods. The film is appreciated because of its good mechanical properties

property		test method	unit	wartość
phisical data
thickness		-	micron	24 (12/12)	27 (12/15)
coefficient of friction	film/film	ASTM-D-1894	-	0,3
yield2			m2/kg	46,4	41,1
treatment printable side1		-	-	CORONA
wettability printable side		ASTM-D-2578	dyne/cm	≥38
mechanical data
tensile strenght	MD	ASTM-D-882	kg/cm2	680
	TD	ASTM-D-882	kg/cm2	1200
elongation at break	MD	ASTM-D-882	%	180
	TDr	ASTM-D-882	%	55
thermal data
shrinkage (120 °C, 5 Min.)	MD	ASTM-D-1204	%	3,0
	TD	ASTM-D-1204	%	2,0
lamination temperature3		-	°C	90 - 130
optical data
gloss (45°) [base film]		ASTM-D-2457	Gardner	10
haze [base film]		ASTM-D-1003	%	70 - 75
standard slitted rolls
core		-	mm	76
length		-	m/roll	3.000
side with adhesive		-	-	inside
glossy side		-	-	outside
printable side1		-	-	outside

1. Possible printing methods after test and with suitable inks:hot foil stamping, silk-screen printing, UV-spot varnishing with silk-screen and flexosystem.
   
2. Theoretical values (rounded of first decimal place).
   
3. Measured temperature while laminating.

The data contained here is provided according to the best knowledge and is based on our general experience and tests undertaken in our laminating film laboratories. But we cannot guarantee these data in respect of factors, which are out of our control and responsibility. Therefore compliance with all legal patents, copyrights, trademarks and registered designs is responsibility of user.